Skip to content

The Complete Guide to Materials Management Metrics

Posted on by Josh Reid

Guide to Materials Management Metrics

Reliable, high-quality data is the backbone of effective materials management. It empowers policymakers, investors, and program managers to strategically allocate resources, invest where impact is greatest, and confidently track progress. Robust data systems also foster transparency and accountability, ensuring that every stakeholder, from producers to consumers, plays a meaningful role in waste reduction.

In today’s data-driven landscape, accurate data is the key to transforming materials management from reactive to strategic, paving the way for a more circular and resilient system. From right-sizing service schedules to improving diversion rates and tracking material recovery, the right metrics can unlock powerful insights and drive operational excellence.

This guide covers the most critical materials management metrics, including how they’re calculated, what influences them, and why they matter. Whether you’re a sustainability manager, operations lead, or data analyst, understanding these metrics is key to building a smarter, more efficient system.

One note before diving in: definitions and calculation methods for several of these metrics vary across jurisdictions, reporting frameworks, and regulatory bodies. Where meaningful differences exist, they are flagged. When in doubt, always clarify your methodology against the standard your program or regulator requires before reporting.

Table of Contents

  1. Capture Rate
  2. Capacity Utilization Rate
  3. Collection Rate
  4. Compliance Rate
  5. Contamination Rate
  6. Cost Per Ton
  7. Disposal Rate
  8. Diversion Rate
  9. GHG Emissions
  10. MRF Throughput
  11. Participation Rate
  12. Permitted Landfill Capacity Remaining
  13. Pounds per Household Recycled
  14. Recycled Commodity Prices
  15. Recycled Commodity Purity
  16. Recovery Rate
  17. Recycling Access Rate
  18. Recycling Rate
  19. Residual Rate
  20. Set Out Rate
  21. Tipping Fees
  22. Waste Composition
  23. Waste Generation

CAPTURE RATE

The percentage of all recyclable materials in the waste stream that are successfully recovered through diversion programs. More precisely, it is the ratio of the quantity of recyclable materials diverted for recovery to the total quantity of recyclable materials available for recovery. (Sources: EPA, SWANA).

Why It Matters

A high diversion rate alone does not tell the full story. Capture rate reveals whether a program is actually reaching the recoverable material in the community. Low capture means valuable commodities, and the revenue they generate, are being lost to disposal.

How To Calculate

Capture Rate = (Recovered Target Material / Total Target Material Generated) x 100

Key Influencing Factors

  • Public participation and awareness
  • Bin availability, design, and placement
  • Collection frequency and convenience
  • Clarity of accepted materials lists

Use Cases

  • Evaluating how much recoverable value is being left in the landfill-bound stream
  • Targeting outreach and education where capture is lowest
  • Setting realistic diversion improvement goals
Infographic explaining capture rate definition and formula for recycling programs

CAPACITY UTILIZATION RATE

Expressed as a percentage, the total tons of materials processed by a facility in proportion to the total tonnage that facility is capable of processing. (Source: EPA)

Why It Matters

Facilities operating significantly below capacity are leaving money on the table. Facilities consistently over capacity are at risk of service disruptions. Knowing your utilization rate is the first step toward making the right call on either end.

How To Calculate

Utilization Rate = (Actual Throughput / Maximum Capacity) x 100

Key Influencing Factors

  • Seasonal fluctuations in waste generation
  • Equipment downtime and maintenance schedules
  • Staffing levels and shift structures

Use Cases

  • Identifying underused infrastructure before investing in new capacity
  • Planning expansions or consolidations based on real utilization data
  • Optimizing operational schedules to reduce cost per ton
Infographic explaining capacity utilization rate for waste management facilities

COLLECTION RATE

The percentage of total recyclable or compostable material generated that is successfully collected by the waste management system.

Why It Matters

Collection rate is a precondition for everything else. Material that is never collected cannot be recycled, composted, or diverted. It is the clearest early signal of whether a program is reaching the households or facilities it was designed to serve.

How To Calculate

Collection Rate = (Material Collected / Material Generated) x 100

Key Influencing Factors

  • Program participation rates
  • Bin contamination (which can result in loads being rejected)
  • Collection logistics and route coverage

Use Cases

  • Monitoring service coverage across a jurisdiction
  • Identifying underserved areas or gaps in collection infrastructure
  • Planning infrastructure investments and route optimization
Infographic defining collection rate and how to calculate it for recycling programs

COMPLIANCE RATE

The percentage of households, businesses, or facilities that adhere to recycling or waste separation guidelines.

Why It Matters

Compliance directly determines the quality of material entering the recovery system. High contamination and poor sortation almost always trace back to low compliance. The data also helps programs justify enforcement investments or pivot toward education-first approaches grounded in what is actually driving behavior change.

How To Calculate

Compliance Rate = (Compliant Property Owners / Total Affected Property Owners) x 100

Note: “Affected property owners” refers to all property owners subject to the requirements of the applicable recycling or waste management ordinance, regardless of whether they are actively participating or have been formally notified. The definition of “compliant” should be established by the administering jurisdiction prior to measurement and applied consistently across reporting periods.

Key Influencing Factors

  • Education and outreach effectiveness
  • Enforcement policies and notice programs
  • Container design and labeling clarity

Use Cases

  • Evaluating program adherence across a service area
  • Designing or refining enforcement strategies
  • Measuring the impact of outreach campaigns over time
Infographic explaining compliance rate formula for mandatory recycling ordinances

CONTAMINATION RATE

The average percentage of materials introduced into a recycling or organics waste stream that are either not accepted under program guidelines, or acceptable materials rendered unsuitable due to excessive residue (such as food-soiled paper or dirty containers).

Contamination can be measured at multiple points in the process: at curbside collection, during waste audits, at transfer stations, through AI-powered sensor technology, or most commonly, at the MRF. For example, if a curbside recycling load delivered to a Material Recovery Facility (MRF) contains 85% acceptable recyclables and 15% contaminants (such as plastic bags, food waste, or non-recyclable items), the contamination rate is 15%. (Source: EPA)

Note: Inbound MRF contamination rate and outbound commodity purity are related but distinct metrics. A MRF can receive highly contaminated loads (high inbound rate) and still produce clean commodity bales through effective sorting (high purity). Both should be tracked. See also: Recycled Commodity Purity and Residual Rate.

Why It Matters

High contamination rates increase processing costs, lower commodity values, damage equipment, and can result in entire loads being landfilled. Reducing contamination is one of the highest-leverage actions a program can take: it improves revenue, reduces operational costs, and builds trust with end markets.

How To Calculate

Contamination Rate = (Weight of Contaminants / Total Weight of Incoming Material) x 100

Key Influencing Factors

  • Public awareness of accepted materials
  • Container design, labeling, and signage
  • Sorting technology and quality control at the MRF
  • Staff training and inspection protocols

Use Cases

  • Assessing the quality of incoming loads at the MRF
  • Targeting contamination reduction campaigns at the household/route level
  • Evaluating the effectiveness of container redesign or education programs
Infographic defining contamination rate measurement in recycling and organics streams

COST PER TON

The total cost of managing one ton of waste or recyclable material through a specific stage or across the entire waste management system. Cost per ton can be calculated for any waste stream or management activity, including MSW collection, recycling, organics processing, C&D disposal, and transfer station operations. It is most useful when calculated consistently across stream types and compared over time. (Sources: SWANA, EPA)

Why It Matters

Cost per ton is the primary financial lens through which program managers, haulers, and policymakers evaluate the economic performance of waste programs. It makes it possible to compare the true cost of recycling versus disposal, justify diversion investments, and identify where operational inefficiencies are driving up program costs. When tipping fees are low, disposal often appears cheaper than diversion on a cost-per-ton basis, which is why programs that track full costs rather than direct fees make better long-term decisions.

How To Calculate

Cost per Ton = Total Program Cost / Total Tons Managed

The formula applies consistently across stream types, but the inputs change based on what is being measured:

StreamNumeratorDenominator
MSW collectionTotal collection costs (labor, fuel, vehicles, overhead)Total MSW tons collected
RecyclingTotal recycling program costs minus commodity revenueTotal recyclable tons collected
OrganicsTotal organics processing costsTotal organics tons processed
C&D disposalTotal disposal costs including tipping feesTotal C&D tons disposed
Net cost of diversionTotal diversion program costs minus avoided disposal costs and commodity revenueTotal diverted tons

Note: SWANA’s Full Cost Accounting framework recommends including all direct and indirect costs: labor, capital, equipment, debt service, insurance, regulatory compliance, education and outreach, and overhead. Programs that exclude indirect costs systematically understate the true cost of service.

Key Influencing Factors

  • Labor, fuel, and equipment costs
  • Facility tipping fees and transportation distances
  • Commodity revenue from recycled materials (offsets recycling cost per ton)
  • Program scale and route density
  • Waste type and contamination levels

Use Cases

  • Comparing the economics of recycling vs. disposal
  • Contract negotiations with haulers and processors
  • Budget forecasting and rate-setting for municipal programs
  • Evaluating the ROI of diversion investments over time
Bar chart showing illustrative cost per ton by waste stream including MSW, recycling, organics, and C&D

DISPOSAL RATE

The percentage of total waste generated that is sent to landfill or incineration rather than diverted through recycling, composting, or reuse.

Why It Matters

Disposal rate is the inverse of diversion rate and often the metric regulators and sustainability certifications focus on most directly. Tracking it consistently over time reveals whether programs are making real progress or simply shifting materials between streams.

How To Calculate

Disposal Rate = (Landfilled + Incinerated Waste / Total Waste Generated) x 100

Note: Total waste generated is typically calculated as the sum of all diverted materials plus all disposed materials. The specific materials counted as “diverted” versus “disposed” may vary by jurisdiction and reporting framework. Confirm scope with your relevant regulatory body before reporting.

Key Influencing Factors

  • Availability and reach of diversion programs
  • Contamination rates in recycling streams
  • Local disposal policies and tipping fee structures

Use Cases

  • Identifying landfill dependency at the program or jurisdictional level
  • Planning waste reduction strategies and infrastructure investments
  • Meeting regulatory reporting requirements
Infographic explaining disposal rate definition and calculation for waste programs

DIVERSION RATE

The percentage of total waste generated that is diverted from landfill or incineration through recycling, composting, or reuse. Diversion rate is a collection-point metric: material is counted as diverted at the moment it is separated from the disposal stream, regardless of what happens to it afterward. (Source: SWANA)

Note: Diversion rate is sometimes used interchangeably with “recycling rate” or “recovery rate,” but these metrics measure different points in the system and can produce meaningfully different numbers. See also: Recycling Rate, Recovery Rate, Capture Rate.

Why It Matters

Diversion rate is the headline metric for most materials management programs. It is the number most commonly cited in regulatory reports, sustainability certifications, and public communications, and for good reason: it is the most straightforward measure of how much waste a program is keeping out of landfill.

Its limitation is equally important to understand. Diversion rate captures what left the disposal stream, not what was ultimately recovered. Material counted as diverted can still end up landfilled if it is rejected at the MRF due to contamination, fails to meet end-market specifications, or cannot be sold due to weak commodity markets. Programs that rely solely on diversion rate may be overstating their actual environmental performance without knowing it.

A program reporting a 40% diversion rate and a program reporting a 40% recovery rate are not necessarily performing equally. The diversion rate program may be losing a significant share of that material downstream.

How To Calculate

Diversion Rate = (Recycled + Composted + Reused Material / Total Waste Generated) x 100

Note: What counts as a diversion activity varies among local, state, provincial, and national governments. Whether energy recovery, source reduction, or backyard composting are included depends on the applicable reporting framework. Confirm your methodology before reporting.

Key Influencing Factors

  • Availability and reach of recycling and composting programs
  • Public participation rates
  • Material recovery infrastructure capacity
  • Contamination levels in collection streams

Use Cases

  • Measuring progress toward zero waste and sustainability goals
  • Evaluating overall program effectiveness
  • Reporting for sustainability certifications (e.g., Zero Waste certification)
  • Regulatory compliance reporting
Infographic defining diversion rate as a collection-point metric for materials management

GHG EMISSIONS

Greenhouse gas emissions resulting from waste generation, processing, and disposal, including methane released from organic decomposition in landfills and CO2 from transportation and processing operations.

Why It Matters

Landfills are a significant source of methane, a greenhouse gas roughly 80 times more potent than CO2 over a 20-year period. Every ton diverted from landfill has a measurable climate benefit. For programs with climate commitments, this metric translates operational performance into climate outcomes.

How To Calculate

The EPA’s Waste Reduction Model (WARM) is the standard tool for calculating GHG emissions reductions from waste management practices. WARM calculates impacts from source reduction, recycling, anaerobic digestion, combustion, composting, and landfilling.

Reference: EPA WARM Model

Key Influencing Factors

  • Waste type and treatment method
  • Whether landfill gas capture systems are in place
  • Recycling and composting rates (which reduce landfill methane)
  • Transportation distances and fleet efficiency

Use Cases

  • Climate action planning and carbon neutrality reporting
  • Sustainability reporting (e.g., GHG inventories, ESG disclosures)
  • Evaluating the climate benefit of diversion investments
  • Public-facing environmental equivalence metrics
Infographic explaining greenhouse gas emissions measurement for waste and recycling programs

MRF THROUGHPUT

The amount of material a Material Recovery Facility (MRF) processes over a given time period, typically measured in tons per day or tons per hour.

Why It Matters

Throughput is the most direct measure of a MRF’s operational efficiency. It reflects the facility’s ability to keep pace with incoming volumes and is essential data for contract negotiations, infrastructure planning, and cost-per-ton analysis.

How To Calculate

MRF Throughput = Total Tons Processed / Operating Time

Key Influencing Factors

  • Facility size and level of automation
  • Staffing levels and shift schedules
  • Material mix and incoming contamination levels

Use Cases

  • Capacity planning and operational benchmarking
  • Identifying bottlenecks in processing lines
  • Justifying investment in equipment or facility upgrades
Infographic defining MRF throughput and how it measures facility processing efficiency

PARTICIPATION RATE

The percentage of eligible households that actively use a recycling or collection service over a defined period. The most common standard, drawn from the EPA and The Recycling Partnership’s State of Curbside definitions, is the percentage of eligible households that set out a cart at least once over two to three consecutive collection opportunities. (Sources: EPA, The Recycling Partnership, SWANA)

Why It Matters

A program can have strong infrastructure and excellent MRF performance, but if households are not participating, none of it matters. Participation rate is the demand-side signal that tells you whether residents are actually using the system you have built. It also interacts directly with contamination: programs with low participation often see higher contamination rates because the households that do participate are less aware of program guidelines.

How To Calculate

Participation Rate = (Households That Set Out at Least Once / Total Eligible Households) x 100

Key Influencing Factors

  • Program awareness and education investments
  • Convenience of collection (frequency, container type, accessibility)
  • Subscription model vs. automatic enrollment
  • Demographics and population density

Use Cases

  • Benchmarking community engagement levels
  • Targeting outreach to low-participation areas or demographics
  • Evaluating the impact of program changes (e.g., switching to automated collection)
Infographic explaining participation rate calculation for curbside recycling programs

PERMITTED LANDFILL CAPACITY REMAINING

The estimated remaining permitted airspace in a landfill, expressed either in cubic yards or converted to years of remaining capacity based on current disposal rates. (Sources: EPA)

Why It Matters

When a landfill runs out of permitted capacity, the consequences are expensive: materials must travel further, tipping fees rise, and municipalities can face service disruption. Tracking remaining capacity in years, not just cubic yards, makes the timeline concrete for planners and decision-makers.

How To Calculate

Remaining Capacity in Years = (Remaining Cubic Yards of MSW Landfill Airspace / 2 cubic yards per ton conversion factor) / MSW tons landfilled per year

Note: The 2 cubic yards per ton conversion factor represents compacted MSW waste. This is an EPA-standard approximation; actual compaction rates vary by facility.

Key Influencing Factors

  • Annual disposal volumes and trends
  • Landfill compaction rates and operational practices
  • Regulatory constraints on capacity expansion or permitting

Use Cases

  • Long-range planning for disposal infrastructure
  • Assessing the urgency of diversion investments
  • State and regional solid waste planning
Infographic defining permitted landfill capacity remaining and calculation methodology

POUNDS PER HOUSEHOLD RECYCLED

The average weight of recyclable material recovered per household eligible for curbside service over a given time period, typically reported annually. Calculated against all eligible households, not just those that participate, making it a true service-level benchmark. (Source: The Recycling Partnership)

Note: This metric is sometimes reported as kilograms per household in Canadian jurisdictions.

Why It Matters

This metric normalizes recovery performance across programs of different sizes, making comparison meaningful. A community recovering 300 lbs per eligible household per year is performing very differently from one recovering 180 lbs, even if their total tonnage looks similar due to population size. Measuring against eligible households rather than participating ones also keeps the denominator honest.

How To Calculate

Pounds per Household = (Annual Curbside Tons Recycled x 2,000) / Total Eligible Households

Key Influencing Factors

  • Materials accepted in the program
  • Participation and set-out rates
  • Household size and waste generation patterns
  • Seasonal variation in material types

Use Cases

  • Benchmarking program performance against peer communities
  • Tracking the impact of program changes (adding materials, expanding service areas)
  • Budgetary planning when scaling or adjusting curbside programs
  • Regulatory or grant reporting
Infographic explaining pounds per household recycled as a program benchmarking metric

RECYCLED COMMODITY PRICES

The market value of materials that have been recovered and processed through recycling systems, including paper, cardboard, plastics, metals, and glass, and are ready to be sold as feedstock for manufacturing new products. Prices are typically expressed in dollars per ton or cents per pound.

Why It Matters

Commodity prices reflect the economic viability of recycling. When prices for materials such as PET, HDPE, OCC, or aluminum are strong, MRFs invest and programs expand. When prices fall, programs may reduce accepted materials or increase landfill diversion. Tracking prices helps programs understand market conditions before they affect operations, not after.

How To Calculate

Recycled commodity prices are published by several industry platforms, including Northeast Recycling Council (NERC), RecyclingMarkets.net, Recycled Materials Association (ReMA), and Recycler’s World.

Key Influencing Factors

  • Material quality and contamination levels
  • End-market demand from manufacturers seeking recycled feedstock
  • Geopolitical events such as import bans or trade restrictions
  • Regulatory policies including recycled content mandates and packaging taxes
  • Fuel and transportation costs
  • Advances in sorting and processing technology

Use Cases

  • Municipal revenue forecasting for recycling programs
  • Operational and investment decisions at MRFs
  • Policymaker assessment of recycling market health
  • Business evaluation of recycled vs. virgin material costs
Infographic defining recycled commodity prices and key market influencing factors

RECYCLED COMMODITY PURITY

The percentage of a sorted output stream that consists of clean, uncontaminated target recyclable material. Also called outbound commodity quality or commodity grade.

Why It Matters

End markets have minimum purity thresholds. Material that fails to meet grade gets rejected or sold at a significant discount. Higher purity directly translates to better commodity prices, lower rejection rates, and more stable relationships with buyers.

How To Calculate

Purity Rate = (Weight of Clean Recyclables / Total Weight of Sorted Output) x 100

Key Influencing Factors

  • Sorting technology and automation level at the MRF
  • Incoming material quality (which reflects upstream contamination)
  • Staff training and quality control protocols

Use Cases

  • Assessing MRF performance against commodity grade specifications
  • Determining marketability of sorted streams
  • Informing contamination reduction strategies upstream
Infographic explaining recycled commodity purity rate and MRF performance measurement

RECOVERY RATE

The percentage of material that was diverted from the disposal stream and successfully processed into a usable secondary material or product. Unlike diversion rate, recovery rate is an end-point metric: material is only counted as recovered if it completed the full journey from collection through processing and re-entered commerce as a secondary input. (Sources: Eunomia, EPA)

Eunomia defines this as the tonnage of recycling process output as a proportion of total material placed on the market. Under this framework, recovery rate and collected-for-recycling rate are related but distinct: the gap between them represents material lost at the reprocessor to contamination, residuals, and processing inefficiency.

Note: Recovery rate, recycling rate, and diversion rate are frequently used interchangeably in practice. In formal definitions, they measure different points in the system. Recovery rate sits between collection-point measures and end-market measures: it captures what the processing system actually produced, not what was collected or what was ultimately sold.

Why It Matters

Collection does not equal recovery. A program can collect large volumes of material and still have a poor recovery rate if contamination losses at the MRF are high. This metric closes the loop between what is put out for collection and what actually becomes a usable secondary material.

Consider a program that diverts 10,000 tons of recyclables from landfill. If that material arrives at the MRF with a 15% contamination rate, 1,500 tons become residuals sent to disposal. If a further 500 tons are rejected by end markets, only 8,000 tons actually become new products. The diversion rate for that material is 100%. The recovery rate is 80%. The 20% gap represents real material, real cost, and a real environmental impact that the diversion rate never captures.

For programs with strong diversion rates but persistent contamination problems, tracking recovery rate is how you find out whether diverted material is actually being recycled, or simply taking a longer route to the landfill.

The gap between collected-for-recycling rate and recovery rate also varies significantly by material type. Eunomia’s research for the Global Beverage Can Circularity Alliance found that PET bottles exhibited loss rates of approximately 23% between collection and reprocessor output, while aluminum cans showed minimal loss between the two stages, reflecting stronger end-market demand and more mature processing infrastructure.

How To Calculate

Recovery Rate (Market-based definition) = (Tonnage of Recycling Process Output / Total Material Placed on Market) x 100

Recovery Rate (Processor output definition) = (Tons of Secondary Materials Produced at Processor / Total Tons of Material Generated) x 100 (EPA)

Key Influencing Factors

  • MRF processing efficiency and residual rates
  • Contamination levels in incoming material
  • End-market specifications and rejection rates
  • Material type and processing infrastructure maturity

Use Cases

  • Evaluating processing system performance independent of collection performance
  • Identifying material-specific loss points within the recycling system
  • Regulatory reporting where recovery is the prescribed metric
  • Producer responsibility and EPR program reporting
Infographic defining recovery rate as an end-point metric distinct from diversion rate

RECYCLING ACCESS RATE

The percentage of households in a jurisdiction that have access to at least one recycling collection program on par with trash collection services. (Source: EPA)

Why It Matters

You cannot participate in a program you cannot access. Recycling access rate is the foundational equity metric in materials management. Programs that report strong diversion rates while serving only a fraction of their jurisdiction are presenting an incomplete picture.

How To Calculate

Recycling Access Rate = (Households with Access to Recycling / Total Households in Jurisdiction) x 100

Key Influencing Factors

  • Program coverage in urban, suburban, and rural areas
  • Multi-family housing inclusion (a common access gap)
  • Whether drop-off services count toward access

Use Cases

  • Identifying service gaps, particularly in rural or multi-family contexts
  • Supporting equity and environmental justice analyses
  • Setting targets for program expansion
Infographic explaining recycling access rate as an equity metric for waste programs

RECYCLING RATE

The percentage of waste material that is recycled. Straightforward in concept, inconsistent in practice.

Recycling rate is the most variably defined metric in materials management. Four definitions are in active use, each measuring a different point in the system:

End-to-end definition (The Recycling Partnership): Material is only counted as recycled if it was collected, processed at a MRF, and sold to an end market as a secondary commodity. Material lost at any stage reduces the rate.

Collected for recycling rate (Eunomia): Tonnage of material sent to a reprocessor as a proportion of total material placed on the market. This definition is more commonly used in producer responsibility and extended producer responsibility (EPR) frameworks than in municipal reporting.

Collection-point definition (EPA): Material is counted as recycled when it is separated from the waste stream and collected for recycling. This is the most widely used definition in U.S. federal reporting.

Composting-inclusive definition (state regulatory frameworks): Recycling rate includes both recycled and composted material as a share of total MSW generated, composted, landfilled, and incinerated. Under this framework, recycling rate and diversion rate can produce nearly identical figures.

Note: Recycling rate is one of the most inconsistently defined metrics in materials management. It is frequently used interchangeably with diversion rate and recovery rate, but those terms measure different points in the system and can produce meaningfully different numbers from the same waste stream. Some jurisdictions define recycling rate to include composting; others do not. Some measure at the collection point; others measure at the reprocessor output or end market. EPA’s reported national recycling rates are calculated at the collection point and will read substantially higher than rates calculated using end-to-end methodologies. Programs should confirm which definition their regulatory or certification framework requires before reporting. Canadian programs should reference their applicable provincial framework or Statistics Canada methodology.

Why It Matters

The same waste stream can produce very different recycling rate figures depending on which definition is applied. The Recycling Partnership’s 2024 data puts the U.S. residential recycling rate at 21% under their end-to-end methodology. EPA collection-point figures for the same period read substantially higher. Neither number is wrong: they are measuring different points in the same system.

For program managers and regulators, the practical implication is straightforward: confirm which definition your reporting framework requires before calculating or publishing a recycling rate. Comparing recycling rates across jurisdictions or programs is only meaningful if the same methodology is being applied consistently.

See also: Diversion Rate, Recovery Rate.

How to Calculate

Recycling Rate (End-to-end definition) = (Recyclable Material Successfully Recycled / Total Recyclable Material Generated) x 100

Recycling Rate (Collected for recycling definition) = Collected for Recycling Rate = (Tonnage Sent to Reprocessor / Total Material Placed on Market) x 100

Recycling Rate (Collection point definition) = (Tons Collected for Recycling / Total Tons Generated) x 100

Recycling Rate (Composting-inclusive definition) = (Total Tons MSW Recycled + Composted / Total Tons MSW Recycled + Composted + Landfilled + Incinerated) x 100

Key Influencing Factors

  • Recycling access rate (the starting point for any material entering the system)
  • Household participation and engagement
  • MRF processing efficiency and residual rates
  • End-market availability and commodity specifications
  • Contamination at each stage of the system

Use Cases

  • Regulatory compliance reporting (confirm which definition applies in your jurisdiction)
  • Sustainability certification reporting
  • Benchmarking program performance against national or regional averages
  • Tracking system performance over time within a consistent methodology
Infographic showing four definitions of recycling rate across EPA, Eunomia, and The Recycling Partnership

RESIDUAL RATE

The percentage of materials coming out of the MRF that are sent to combustion facilities or landfills rather than to end markets as recovered commodities. (Source: EPA)

Why it Matters

Even well-run recycling programs generate residuals. A high residual rate means a significant share of what is being called “recycled” is actually being disposed of downstream. Tracking this metric closes the gap between collection performance and actual material recovery.

How to Calculate

Residual Rate = (Tons Sent to Disposal / Total Tons Received at MRF) x 100

Key Influencing Factors

  • Incoming contamination levels
  • Sorting technology capabilities
  • End-market specifications and rejection rates
  • Material mix and presence of difficult-to-sort items

Use Cases

  • Benchmarking MRF operational performance
  • Evaluating the true disposal impact of a recycling program
  • Justifying equipment investments to reduce residuals
Infographic defining residual rate and its impact on MRF recycling performance

SET OUT RATE

The number of homes with recycling placed curbside at any given collection opportunity, expressed as a percentage of total homes on a route.

Why It Matters

Set out rate is participation rate measured at the route level, on a specific day. It is one of the most operational metrics in this list and one of the easiest to collect systematically. Programs that track set out rates over time can identify participation trends before they show up in diversion data.

How to Calculate

Set Out Rate = (Homes with Recycling at the Curb on a Given Collection Day / Total Homes on Route) x 100

For example, if there are 100 homes on a route and 40 have recycling out, the set-out rate is 40%.

Key Influencing Factors

  • Collection frequency and schedule awareness
  • Seasonal patterns (e.g., lower rates in winter months)
  • Neighborhood demographics and housing density
  • Program design (automatic enrollment vs. opt-in)

Use Cases

  • Route-level participation monitoring
  • Identifying low-engagement zones for targeted outreach
  • Operational planning for collection vehicle sizing and scheduling
Infographic explaining set out rate as a route-level participation metric

TIPPING FEES

The per-ton fee charged to dispose of waste at a landfill, transfer station, or processing facility. Also known as gate rates or gate charges. For the purpose of this entry, tipping fees refer to publicly posted self-hauling rates rather than contracted rates, which are negotiated privately and typically lower. (Source: EREF)

Why It Matters

Tipping fees are a direct economic lever on diversion behavior. When disposal costs rise, diversion programs become more cost-competitive. When they are low, the financial case for diversion weakens.

National average MSW tipping fees have increased 29% since 2016, reaching $62.28/ton in 2024, the largest single-year increase since 2022. That trend is driven primarily by inflation and rising labor costs, which show the strongest correlation with tip fee increases of any economic indicator tracked by EREF. Programs that are not monitoring tipping fee trends are likely to encounter budget surprises when disposal contracts come up for renewal.

Regional variation is substantial. In 2024, the Northeast averaged $80.67/ton while the South Central region averaged $44.87/ton. Individual states vary even more: New Hampshire averaged $110.46/ton while Kansas averaged $34.78/ton. The national average is a useful benchmark but should not substitute for regional or state-level data when budgeting or negotiating contracts.

How To Calculate

Average Tipping Fee = Total Disposal Cost / Total Tons Disposed

Key Influencing Factors

  • Facility type and ownership (private landfills averaged $74.75/ton in 2024 vs. $55.89/ton for public facilities)
  • Regional regulations, taxes, and environmental compliance costs
  • Waste type (MSW vs. C&D vs. special waste)
  • Presence of waste-to-energy infrastructure (WTE states averaged $71.28/ton vs. $55.57/ton in non-WTE states)
  • Labor costs and inflation (strongest economic correlate of tip fee changes per EREF regression analysis)

Note: C&D waste is accepted at MSW landfills in 41 states and is often assumed to carry higher tipping fees than MSW. In practice, 55% of facilities charge identical rates for both waste streams, and the national average C&D fee of $65.84/ton is not statistically different from the $62.28/ton MSW average. Programs should confirm local C&D rates directly rather than assuming a premium.

Use Cases

  • Budgeting for municipal waste and diversion programs
  • Evaluating the economic case for landfill diversion investments
  • Contract negotiations with haulers and facility operators
  • Long-range solid waste planning
Infographic defining tipping fees with 2024 EREF national average benchmark data

WASTE COMPOSITION

The breakdown of a waste stream by material type, typically expressed as a percentage of total weight. A waste composition study (also called a waste characterization study or waste audit) measures what is actually in a given waste stream at a specific point in time. (Sources: EPA)

Why It Matters

Waste composition is the foundational dataset that makes every other metric more meaningful. You cannot design an effective recycling program without knowing what materials are in the stream. You cannot set realistic capture rate or diversion rate targets without knowing what share of the stream is theoretically recoverable. Composition data also reveals mismatches between what a community is generating and what its collection program accepts, which is often where significant diversion opportunity is hiding.

Waste loads are physically sampled at a facility, sorted manually into predefined material categories, and weighed. Results are expressed as a percentage of total sample weight by material type.

How To Calculate

Material Category (%) = (Weight of Material Category / Total Sample Weight) x 100

Note: Sample size, seasonal timing, and source type (residential vs. commercial vs. institutional) all affect results significantly. ASTM D5231 provides the standard methodology for conducting defensible field studies.

Key Influencing Factors

  • Geographic region and local consumption patterns
  • Seasonal variation (food waste increases in summer; packaging increases around holidays)
  • Source type (residential, commercial, institutional, C&D)
  • Existing diversion programs (which remove certain materials before sampling)

Use Cases

  • Designing or redesigning collection programs and accepted materials lists
  • Identifying the highest-value diversion opportunities in a waste stream
  • Setting realistic diversion and capture rate targets
  • Evaluating potential for new programs (organics, film plastic, textiles)
  • Sizing waste-to-energy and processing infrastructure
Infographic explaining waste composition study methodology and material category calculation

WASTE GENERATION

The total amount of waste produced by a population, business, or facility over a specific period. (Source: SWANA)

Why It Matters

Waste generation is the denominator that gives every other metric its context. Diversion rate, recycling rate, and disposal rate all require an accurate measure of total generation to be meaningful. Programs that under-count generation appear to be performing better than they are.

How To Calculate

Waste Generation = Total Diverted Material + Total Disposed Material

Per Capita Waste Generation = Total Waste Generated / Population Served

Key Influencing Factors

  • Population size, density, and household size
  • Consumption patterns and economic activity
  • Seasonal variation (e.g., higher generation during holidays)

Use Cases

  • Planning collection services and fleet sizing
  • Setting realistic reduction targets
  • Benchmarking performance against peer communities or national averages
Infographic defining waste generation and per capita calculation for materials management

Putting Your Metrics to Work

Knowing your metrics is step one. Having a system that calculates them for you, consistently and without manual effort, is step two.

Re-TRAC is built for large-scale data collection, aggregation, and analysis. If you’re still tracking materials management data in spreadsheets or piecing together reports from multiple sources, there’s a better way: explore sample Re-TRAC reports.

Definitions and data in this article draw from the following sources: SWANA, U.S. Environmental Protection Agency (EPA), The Recycling Partnership, Environmental Research & Education Foundation (EREF), Eunomia, the Northeast Recycling Council (NERC), ASTM International (D5231), and Re-TRAC’s internal standardization research. Tipping fee data is sourced from EREF’s Analysis of MSW Landfill Tipping Fees, 2024 (published July 2025). Recycling rate and pounds per household data are sourced from The Recycling Partnership’s State of Curbside Recycling Report. Where definitions vary across frameworks, the applicable source is noted inline. Definitions in this guide are intended as a general reference. Always confirm calculation methodology against the standard required by your specific regulatory or reporting context before reporting.